Cart 0

New TC-5050 Silicone!

Posted by Mitch Rogers on

We now have TC-5050 silicone for mold making. This is a very firm, Shore A 50 platinum silicone that is ideal for prototyping applications. TC-5050 must be degassed as it is a very thick silicone system. You can find TC-5050 here on our webstore. As with our other Platinum formulas, remember that Platinum, or addition cured silicones are susceptible to cure inhibition on surfaces with contaminates such as sulfur, latex, and aloe vera. When in doubt, run a test cure in insure compatibility.

Below are several excellent moldmaking videos featuring 5050 silicone for a variety of product development applications.

Share this post

← Older Post Newer Post →

Leave a comment

Please note, comments must be approved before they are published.