Cart 0

Rigid Casting Foam #6 Density - All Kit Sizes

  • $39.00

Rigid Casting Foam #6 is a 1A:1B mix by volume polyurethane self-skinning rigid foam that has a free-rise density of 6 lb per cubic foot. Rigid Casting Foam is excellent for casting weapon props as well as functional pieces.

Looking for a low density foam for "back-filling large, hollow resin parts? Try our Rigid Casting Foam #3. This is an economical 3lb density foam.

If you need a casting resin for solid pours such as small bones or decorative parts, check out our economical casting resin ArtKast. ArtKast Pourable resin maybe used to "slosh" a hollow skin that can then be back-filled with Rigid Casting foam to create a tough, impact-resistant, light-weight part.

Generally Rigid Casting Foam is poured into Tin Cure or Platinum Cure silicone molds or properly released polyurethane rubber molds.

Rigid Casting Foam cures Tan but can be pigmented with PolyPig Pigments. (See urethane additives)

Mixing Ratio: 1A:1B or 120A:100B by Weight
Cream Time: 45 Seconds
Demold Time: 30 Minutes
Ideal working temperature: 75ºF - 85ºF

Contains a Gallon (9lbs) Part A and a Gallon (7.5lbs) Part B.  Total Kit weight 16.5lbs.

Technical Data: Part A - MSDS - Part B - MSDS

We Also Recommend