Rigid Casting Foam #3 Density - All Kit Sizes
Important! This is the low density version of our popular Rigid Casting Foam. This formula is 3lb density. It does "skin," but is best suited for "back-filling" large hollow resin casts.
Rigid Casting Foam #3 Density is a 1A:1B mix by volume polyurethane self-skinning rigid foam that has a free-rise density of 3 lb per cubic foot. Rigid Casting Foam is excellent for back-filling large, rotationally cast parts; such as EasyFlo 120 or ArtKast Pourable.
If you need a casting resin for solid pours such as small bones or decorative parts, check out our economical casting resin ArtKast. ArtKast Pourable resin maybe used to "slosh" a hollow skin that can then be back-filled with Rigid Casting foam to create a tough, impact-resistant, light-weight part.
Generally Rigid Casting Foam is poured into TinSil or PlatSil silicone molds or properly released (Pol Ease 2300) 74 & 75 Series polyurethane rubber molds.
Rigid Casting Foam cures Tan but can be pigmented with PolyColors Pigments. (See urethane additives)
Mixing Ratio: 1A:1B or 120A:100B by Weight
Cream Time: 45 Seconds
Demold Time: 30 Minutes
Ideal working temperature: 75ºF - 85ºF
Contains a Gallon (9lbs) Part A and a Gallon (7.5lbs) Part B. Total Kit weight 16.5lbs.
Technical Data: Part A - MSDS - Part B - MSDS
We Also Recommend