Rigid Casting Foam #6 is a 1A:1B mix by volume polyurethane self-skinning rigid foam that has a free-rise density of 6 lb per cubic foot. Rigid Casting Foam is excellent for casting weapon props as well as functional pieces.

Looking for a low density foam for "back-filling large, hollow resin parts? Try our Rigid Casting Foam #3. This is an economical 3lb density foam.

If you need a casting resin for solid pours such as small bones or decorative parts, check out our economical casting resin ArtKast. ArtKast Pourable resin maybe used to "slosh" a hollow skin that can then be back-filled with Rigid Casting foam to create a tough, impact-resistant, light-weight part.

Generally Rigid Casting Foam is poured into TinSil or PlatSil silicone molds or properly released (Pol Ease 2300) 74 & 75 Series polyurethane rubber molds.

Rigid Casting Foam cures Tan but can be pigmented with PolyPig Pigments. (See urethane additives)

Mixing Ratio: 1A:1B or 120A:100B by Weight
Cream Time: 45 Seconds
Demold Time: 30 Minutes
Ideal working temperature: 75ºF - 85ºF

Contains a Gallon (9lbs) Part A and a Gallon (7.5lbs) Part B.  Total Kit weight 16.5lbs.

Technical Data: Part A - MSDS - Part B - MSDS