![Mold Soap Plaster Sealer - 4oz](http://www.brickintheyard.com/cdn/shop/products/image_7618a322-0b27-413a-a1e2-d37e4d18126c_large.jpg?v=1571300519)
Mold Soap Plaster Sealer - 4oz
Mold Soap Sealer for Plaster.
Instructions: Mix 1 part soap with 2-3 parts warm water. Brush onto clean plaster surface to seal. Wipe away excess with paper towel and allow drying time of 10-15 minutes.
For Urethane rubber molds or castings: a release agent such as Pol-Ease 2300 may be applied after the soap has dried.
For Silicone rubber molds or castings may require a light spray of Pol-Ease 2500 after soap has dried.
Technical Data: SDS
We Also Recommend