Mold Soap Plaster Sealer - 1lb
Mold Soap Sealer for Plasters and Gypsums.
Instructions: Mix 1 part soap with 2-3 parts warm water. Brush onto clean plaster surface to seal. Wipe away excess with paper towel and allow drying time of 10-15 minutes.
For Urethane rubber molds or castings: a release agent such as Pol-Ease 2300 may be applied after the soap has dried.
For Silicone rubber molds or castings may require a light spray of Pol-Ease 2500 after soap has dried.
Technical Data: SDS
We Also Recommend