TC-5130 30A Platinum Silicone
Important! This is a platinum silicone system. Platinum or addition cure silicones may be inhibited by some pattern and mold surfaces! A small test is recommended to determine suitability.
TC-5130 A/B is a room temperature, 30A addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5130 A/B is translucent enough to see through when casting into the mold cavity.
Release non-porous patterns or molds with 2500 or SupraLease PTR mold release. 2350 or pure petroleum jelly or fragrance free Vaseline may be used as a release for porous surfaces.
Shore Hardness | Worktime | Demold Time | Shrinkage (in./in.) |
Viscosity | Ratio pbw(pbv) |
Color |
---|---|---|---|---|---|---|
30A SHORE |
40-50 minutes | 3-4 hours | nil | 5430 | 100/100 | Translucent |
Product Sheets:
We Also Recommend