TC-5110 10A Soft Silicone
Important! This is a platinum silicone system. Platinum or addition cure silicones may be inhibited by some pattern and mold surfaces! A small test is recommended to determine suitability.
TC-5110 A/B is a room temperature, addition/platinum curing silicone rubber designed for making molds and parts. Featuring exceptional tear strength, low viscosity, 1:1 mix ratio, and a quick demold time, this system is user friendly while producing high quality finished products. When used to make molds, the TC-5110 A/B is translucent enough to see through when casting into the mold cavity. For making parts, this system is easily pigmented with BJB’s 6800 Series Universal Pigments.
This product has been tested for skin safety and cytotoxicity. Test results available upon request.
|
|
|
|
|
|
|
|
Shore Hardness | Worktime | Demold Time | Shrinkage (in./in.) |
Viscosity | Ratio pbw(pbv) |
Color |
---|---|---|---|---|---|---|
10 SHORE A | 30-40 minutes | 3-4 hours | nil | 2500 | 100/100 | Translucent |
Product Sheets:
We Also Recommend