F-116 REV1 - All Kit Sizes
BJB’s “F-1 Series”, with its 3 to 10 minutes of work time, addresses the need for shorter processing times and higher part production. These 5-95 Shore A products exhibit excellent physical properties and easily process at room temperature. You’ll also find the easy mix ratio to be extremely convenient. F-116 REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment.
Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.
UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.
Silicone Molds: Platinum based silicones are recommended for molds. Tin based silicones may cause cure inhibition. For more info, contact our Tech Dept
WARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.
FP-16 may also be thickened to a paste for brush on skins using PolyFiber Thickener. Flexible foams, such as TC-266 bond very well to FP rubber making a great material combination for body props. FP-15 may be pigmented with our PolyColor Pigments or BJB pigments found in our additives section.
|Product Data Sheet
We Also Recommend