Cart 0

Foam Coat - 25lb

  • $29.95

Foam Coat is a rock-hard coating that protects and beautifies your foam projects. Comes in a dry powder. Just mix with water. Sandable. Inherintly fire resistant. Can be used outdoors when sealed with any outdoor paint, or mixed with Boost liquid fortifier, or Bounce liquid rubberizer. Apply thick with a trowel or thin to use with a paintbrush. Sets up in only about 15 minutes. Extend drying time by adding up to 50% latex paint with your water before mixing into the dry foam coat. 3lbs. covers up to 30 sq. ft. Dollar-for-dollar covers 4x as much as Rosco Foam Coat, is at least as strong, and has a longer shelf life. Plus it's compatible with Boost, Bounce, and Grit!!

-Easy to mix. Just add water.
-Apply thick with a trowel or thin with a paintbrush
-Covers up to 300 square feet
-Indoor & outdoor use
-Soap and water clean-up


MIXING: Mix in a clean container with clean water. Use 1 part cool water per 3 parts of powder (for example, 1 cup of water per 3 cups of powder). Add powder to water and mix until Foam Coat turns to a smooth paste. Do not overmix.
APPLYING: Fill big cracks and holes by applying pasty mixture with a trowel. You may add more water until mixture is thin enough to apply with a paint brush, although thinning weakens coating. Use thinned mixture to texture large areas. May be applied as thick as 3/8 inch. Try texturing surface before coating sets.
SET TIME: Use within 10 minutes. Sets hard in 30 minutes. Maximum bond and hardness in 24 hours.
FINISHING: Remove dust before painting. This product goes on smooth and can be sanded. Can be used outdoors if sealed with paint. Add Grit texturizer to create a rock-like surface effect.
CLEAN-UP: Clean tools and brushes with clean, soapy water before coating hardens.

Technical Data:   SDS  -  Instructions

Click here for Foam Coat System Mixing Details and User Tips

We Also Recommend