Zip ME-515E Polyurethane Mold Release - Single Cans & Cases
Important! This product cannot be shipped to Alaska or Hawaii or be shipped via USPS. This product must be shipped UPS or Fed Ground ONLY.
Even more important! Do not use with liquid silicone! E236 will cause liquid silicone to bond to patterns or inhibit the cure of Platinum formulas! Use Zip 301 for silicone-to-silicone or silicone-to-pattern applications.
Silicone Spray Release. Use for releasing Polyurethane rubber and plastic from resin, plaster, wax. Spray a light mist and use a dry brush to remove any excess and spread evenly.
Superior mold release with minimum build up on mold surfaces.
Use on polyurethane, epoxy, polyester, aluminum, or steel molds.
Excellent for casting urethane, epoxy and polyester parts.
NOTE: Can be removed with a detergent water solution if painting is required. Wash cast parts with hot water and detergent before attempting to apply surface finish. Several washings may be necessary depending on the amount of release used.
Note: This product cannot be shipped to Alaska or Hawaii or be shipped via USPS.
We Also Recommend