Menu
Cart 0

F-116 REV1 - All Kit Sizes

  • $59.00


BJB’s “F-1 Series”, with its 3 to 10 minutes of work time, addresses the need for shorter processing times and higher part production.  These 5-95 Shore A products exhibit excellent physical properties and easily process at room temperature. You’ll also find the easy mix ratio to be extremely convenient. F-116 REV 1 can be cartridge-dispensed with our CPE handheld dispense equipment.

  • RoHS/REACH Compliant
  • Popular for Parts & Molds
  • High Tensile & Tear Strength
  • Special Effects & Props
  • Medical Training Models
  • Easy to Pigment

HELPFUL NOTES:

Color Variations: The color of the base material may vary slightly from batch to batch due to raw ingredients. Exposing the material to various conditions such as heat and UV light will alter the color of the cured system. Color stability is not guaranteed. This product can be pigmented, but you may see more color shift when using lighter pigments.

UV Resistance: This product is not classified as UV resistant. BJB offers an additive called UV-100, a UV inhibitor and anti-oxidant blend that will help slow down the effects of UV degradation and color change. The level of effectivness varies from product to product.

Silicone Molds: Platinum based silicones are recommended for molds.  Tin based silicones may cause cure inhibition.  For more info, contact our Tech Dept

 

Prop 65 WarningWARNING: This product can expose you to chemicals including Toluene diisocyanate, which is known to the State of California to cause cancer. For more information, go to www.P65Warnings.ca.gov.


FP-16 may also be thickened to a paste for brush on skins using PolyFiber Thickener. Flexible foams, such as TC-266 bond very well to FP rubber making a great material combination for body props. FP-15 may be pigmented with our PolyColor Pigments or BJB pigments found in our additives section.

  • RoHS/REACH Compliant
  • Demold in under an hour
  • Translucent and easy to pigment
  • 5-6 minute work time
  • Low viscosity and easy to mix
  • Simple ratio


Shore Hardness Worktime Demold Time Shrinkage
(in./in.)
Viscosity Ratio
pbw(pbv)
15 A 5 minutes 45-75 minutes 0.001 750 cps 100/100 pbw
MSDS Sheets

 F-116 Rev1 SDS Part A

 F-116 Rev1 SDS Part B

Product Data Sheet

F-116 REV1 Technical Data Sheet



We Also Recommend