Poly 1512 Gallon Kit (16 Lbs)
1512 is our choice for strength, large mother molds, and spraying for hardcoating foam. 1512 reproduces fine detail, yet can be machined, drilled or sanded.
Mix Ratio: 1A: 1B
Working Time: 22 Minutes (Decrease to 5 Min with 15X)
Demold: 1- 16 Hours (Mass Dependent- Decrease to 0.5 hour with 15X)
Shrinkage Upon Cure: Very Low
Mix in PolyFiber2 to thicken for brushing resin into molds for castings or brushing on for strong, light mother mold shells.
Use PlasPak spray gun and cartridge system, and add accelerator (74/75 X), for hard-coating polystyrene or spraying for large open castings and making mother molds ($650.00 for 1:1 gun, $5 per 2-sided cartridge, and $2.25 per static mixer tip- Call to order spray gun system at 888-676-2489).
We Also Recommend