PlatSil 73-15 Precision Silicone is a ultra low viscosity, high elongation, 1:1 RTV Silicone Rubber, that has a 30 minute working time and a 4 hour demold time. It cures a Hazy Translucent color.

PlatSil® 73-15 Precision Siliconeis recommended for evaluation as a mold material for polyester, epoxy and polyurethane resins, as well as for waxes and many other materials. PlatSil® 73-15 offers advantages over tin-catalyzed systems in certain applications because on curing it doesn’t shrink, it doesn’t produce alcohol (like tin-catalyzed silicones) which can inhibit urethane castings, and it can be heat accelerated to speed the cure.

PlatSil 73-15 is used by Neill Gorton in The Art of Silicone Prosthetics DVD Series.

No release agent is necessary for casting most materials in PlatSil® 73-15 Precision Silicone molds, but for a longer mold life with epoxy, polyurethane or polyester resins, a barrier coat or release agent, (i.e., Pol-Ease® 2300) is recommended. Properly cured PlatSil® 73-15 molds last for years without deterioration.

Kit Contains 40 lbs of Part A and 40 lbs of Part B for a total of 80 lbs.

For small to medium sized molds, our clear mold tubes (see pictures) provide an easy barrier for mold-making. Click here for our mold tube selection.

Mix Ratio: 1A:1B by Weight or Volume
Durometer: Shore A 15
Working Time: 30 Minutes
Demold Time: 4 Hours
Color: Hazy Translucent
Mixed Viscosity: 2,500 cP
Shrinkage Upon Cure: Nil

Technical Data: Datasheet -  MSDS - Physical Properties