Cart 0
PolyPoxy 6060 Blue Surface Coat

PolyPoxy 6060 Blue Surface Coat

  • $78.00

PolyPoxy® 6060 a blue, room temperature curing (RTV) surface coat epoxy designed for quality reproduction of a variety of surfaces. This epoxy is a general purpose surface coat formulated for the fabrication of laminated tools, including dies, foundry patterns, core boxes, and router, trim and inspection fixtures. When cured, this resin system provides a hard, tough, and chip-resistant surface.

PolyPoxy® 6060 a has a pot life of 30 to 35 minutes, a demold time of 12 to 16 hours, and cures to a Shore D89 hardness.

WARNING: This product contains Bisphenol A (CAS 25068-38-6), a chemical known to the State of California to cause birth defects or other reproductive harm, and contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer.  For more information, go to

Mix Ratio

Shore Hardness

Maximum Application Thickness Pot Life

Demold Time

Cured Color

Mixed Viscosity

Specific Gravity

Specific Volume

Heat Deflection Temp.

100 Parts Resin : 9 Parts Hardener by weight



30-35 min.

12-16 hr.


25,000 cP


15.8 in³/lb

158°F (post-cure required)

Stir Resin thoroughly before use. BEFORE USE: Thoroughly read Safety Data Sheets, Technical Bulletin, and product labels. WARNING: THE EPOXY CURE REACTION IS VERY EXOTHERMIC. Do not apply in thicknesses greater than the recommended maximum thickness for each product. Doing so can cause warping and even a fire. Exothermic reactions can be greater when working in temperatures higher than the recommended mixing/application temperature range and when the epoxy is in a mass in the mixing container. It is recommended to only mix as much epoxy as will be needed for one layer. Because epoxy is especially exothermic in masses, it is important to work quickly to get the epoxy out of the mixing container and onto the desired surface.


3.08-lb kit includes:
2.8 lb of PolyPoxy® 6060 Resin (~1 quart)
0.28 lb of PolyPoxy® 6060 Hardener (~0.5 pint)

65.5-lb kit includes:
60 lb of PolyPoxy® 6060 Resin (~5 gallons)
5.5 lb of PolyPoxy® 6060 Hardener (~1 gallon)

We Also Recommend