Cart 0
PolyPoxy 6005 White Surface Coat

PolyPoxy 6005 White Surface Coat

  • $59.00

PolyPoxy® 6005 a white, thixotropic, room temperature curing (RTV) surface coat epoxy. designed for quality reproduction of a variety of surfaces. This epoxy is a general purpose surface coat formulated for the fabrication of laminated tools, including dies, foundry patterns, core boxes, and router, trim and inspection fixtures. When cured, this resin system provides a hard, tough, and chip-resistant surface.

This non-sag formula has a pot life of 18 to 22 minutes, a demold time of 8 to 12 hours, and cures to a Shore D89 hardness.

Mix Ratio

Shore Hardness

Maximum Application Thickness Pot Life

Demold Time

Cured Color

Mixed Viscosity

Specific Gravity

Specific Volume

Heat Deflection Temp.

6 Parts Resin : 1 Parts Hardener by weight



18-22 min.

8-12 hr.


Thixotropic Paste


18.5 in³/lb

138°F (post-cure required)

Stir Resin thoroughly before use. BEFORE USE: Thoroughly read Safety Data Sheets, Technical Bulletin, and product labels. WARNING: THE EPOXY CURE REACTION IS VERY EXOTHERMIC. Do not apply in thicknesses greater than the recommended maximum thickness for each product. Doing so can cause warping and even a fire. Exothermic reactions can be greater when working in temperatures higher than the recommended mixing/application temperature range and when the epoxy is in a mass in the mixing container. It is recommended to only mix as much epoxy as will be needed for one layer. Because epoxy is especially exothermic in masses, it is important to work quickly to get the epoxy out of the mixing container and onto the desired surface.

WARNING: This product contains crystalline silica, quartz (CAS 14808-60-7), a chemical known to the State of California to cause cancer. For more information, go to


2.75-lb kit includes:
2.33 lb of PolyPoxy® 6005 Resin (~1 quart)
0.42 lb of PolyPoxy® 6005 Hardener (~0.5 pint)

9.34-lb kit includes:
8 lb of PolyPoxy® 6005 Resin (~1 gallon)
1.34 lb of PolyPoxy® 6005 Hardener (~1 quart)

53-lb kit includes:
45 lb of PolyPoxy® 6005 Resin (~5 gallons)
8 lb of PolyPoxy® 6005 Hardener (~1 gallon)

We Also Recommend