From BITY Mold Supply... Free Video Instructionals on YouTube.com!
Go to youtube.com/bitymoldsupply and get ready to learn, or at least be entertained! Very nice when you have 2-5 minutes free time or just need to refresh your memory on a topic. Over 100 videos and counting.... SUBSCRIBE to our channel, and receive instant notice of new additions. Subjects include Mold-Making, Resin and Plaster Casting, Plaster Mixing, Lifecasting, SPFX Makeup, and much more.

Fall 2012 Class Schedule

Essentials of Lifecasting
Saturday April 14th, 2012    9am - 6pm
Learn both Alginate and Silicone lifecasting techniques.
Includes sample materials & DVD.   Cost $150

Gel-10 FX
Saturday April 28th    9am - 6pm
Spend the whole day seeing fresh makeup effects being used in Hollywood now.
Includes sample materials & DVD.   Cost $95

Mold Making Class
Saturday May 26th    9am - 6pm
Learn basic mold making & casting techniques.
Includes sample materials & DVD.   Cost $95

Prop Making/Mold Making Class
Friday and Saturday February 24th & 25th    9am - 5pm
Learn the mold making and casting techniques needed for making props. Great class for beginners in mold making as well as those who just want to learn better techniques for finishing your props.
Includes sample materials & DVD.   Cost $250

Class Descriptions

Intro to Mold-Making
Join the staff of BITY Mold Supply, spending an entire day, discussing mold-making and casting materials and methods. This is an informational class with demonstrations designed to give you the overview you need to start visualizing your concept or project. Bring your questions. Rubber Trial Kit included in class fee. $150

Essentials of Lifecasting
Introduction to the art of lifecasting. Our one day seminar discusses and demonstrates hand casting, arm casting, and full head and shoulder casting on a live model. Will discuss body and torso molding. Bring your questions and project ideas. Lifecasting 101 DVD and Starter kit included in class fee. $150

Advanced Mold-Making
Our "hands-on" mold-making class. Learn advanced multiple piece rubber mold-making. This class covers shim technique, plugs for deep undercuts, high strength resin mother-molds and casting techniques. Students will leave with a finished mold from a model provided by instructor. Prior experience or Intro to Mold-Making is required. Limited to 5 participants. $275

Gel-10 FX
Learn how to make specialized, super-fast special prosthetic make-up effects. Basics of Gel-10 are explained: Gel-10 makeup effects, Gel-10 lifecasting techniques, Gel-10 appliances, and ultra-fast Gel-10 mold-making. A must for all makeup artists and special effects technicians. $75

Helping you tackle your molding or casting challenge is our specialty. To best utilize our guidance we recommend that you first consider these basic "truths" of mold-making:

Mold making and casting requires you to be part chemist. Don't forget that you are mixing chemicals and there are many variables and unknowns involved.

Molding and casting compounds are not typical consumer goods. Your results with resins and mold compounds will be directly proportional to your skill level and the effort you put in to learning the materials and process.

Experiment. Each project you undertake will require a certain amount of research and development. Be prepared to experiment and hone your process accordingly.

Maintain realistic expectations. There will be failures. As your skills improve your troubleshooting skills will increase also. Don't expect your first mold or cast to be perfect.

BITY Mold supply offers volumes of technical support, but that knowledge is useless without a basic understanding of this craft. Consider our knowledge and tech support as a supplement to the manufacturer's data sheets and instructions: not a replacement. Read everything you can relative to your project before you start.

There will be times where you will be attempting an application no one has ever tried before. Don't let that bother you. Experimenting with new techniques and materials will help you carve out your "niche" in the molding and casting market. Keep in mind that this is a trade and skill set that takes years to perfect. Even after years of mold-making and casting you will find that there is always a new challenge and a different technique to apply. If this state of perpetual technical challenge intrigues you, then mold making will prove to be a rewarding experience for you. If you find these elements of mold making somewhat daunting, fear not, you might just grow to like it. I personally became a mold maker as a means to an end (reproducing my art) and found that I enjoyed the mold making challenge as much, if not more, than sculpting itself.

Good luck and happy, accurate mold making!